Most paver driveways cost about $10 to $30 per square foot installed, so a typical 640 square foot two-car driveway runs roughly $6,400 to $19,200. National averages sit around $11,500 to $13,000. Premium materials like cobblestone can reach $40 to $75 per square foot, and removing an old concrete driveway adds about $2 to $6 per square foot. In Martin County, the final number depends most on size, paver type, pattern and how much base work the site needs.
This guide breaks down those ranges by driveway size, explains what changes a quote, and shows what a well-built Treasure Coast paver driveway looks like.
Key takeaways
- Typical installed cost: $10 to $30 per sq ft. High-end cobblestone: $40 to $75 per sq ft.
- A standard two-car driveway (about 16 by 40 feet, or 640 sq ft) runs $6,400 to $19,200 at typical rates.
- Tear-out of an existing driveway: $2 to $6 per sq ft extra.
- Paver driveways can last 30 to 50 years with occasional maintenance, and individual pavers can be replaced instead of patching a slab.
- The parts of the quote you never see after install (base depth, compaction, edge restraint, drainage) decide whether the driveway stays flat.
How much does a paver driveway cost by size?
These ranges apply the published $10 to $30 per square foot installed range to common Treasure Coast driveway sizes. They are planning numbers, not a quote.
| Driveway | Approx. size | Typical installed range | With tear-out ($2 to $6/sq ft) |
|---|---|---|---|
| Single-car | 12 x 40 ft (480 sq ft) | $4,800 to $14,400 | add $960 to $2,880 |
| Standard two-car | 16 x 40 ft (640 sq ft) | $6,400 to $19,200 | add $1,280 to $3,840 |
| Two-car with turnaround or side parking | about 1,000 sq ft | $10,000 to $30,000 | add $2,000 to $6,000 |
| Circular or estate drive | about 2,000 sq ft | $20,000 to $60,000 | add $4,000 to $12,000 |
Many Palm City, Hobe Sound and Jupiter Island estate driveways fall in the last two rows, especially when the drive connects to an entry court or walkway system.
What drives the price of a paver driveway?
Paver material
| Material | What it is | Cost position | Notes for the Treasure Coast |
|---|---|---|---|
| Concrete pavers | Manufactured interlocking units | Lowest of the paver options | Widest color and pattern range; driveway-rated thicknesses available |
| Clay brick pavers | Fired clay | Mid to high | Color does not fade; classic herringbone look |
| Travertine | Natural limestone | Mid to high | Popular for entries and pool areas; driveway use needs thicker, driveway-rated stone |
| Shellstone and coquina-look stone | Natural or cast stone with visible shell | Mid to high | A coastal Florida signature; confirm it is rated for vehicles |
| Cobblestone | Natural stone setts | Highest ($40 to $75 per sq ft installed) | Labor-intensive installation drives the cost |
For a side-by-side of pavers and poured concrete, see our guide to pavers vs. concrete for Florida patios and driveways.
Pattern and borders
Straight running bond is the fastest to install. Herringbone patterns, especially laid at 45 degrees, need more cuts and more labor, but they are widely used on driveways because the interlock resists shifting under turning tires. Soldier-course borders and contrasting bands add linear footage of cutting and setting. Curves add waste.
Base preparation
A driveway carries vehicle loads, so it needs a deeper compacted base than a patio, plus a solid edge restraint so the field cannot spread. Many manufacturers specify thicker pavers (often 80 mm, about 3 1/8 inches) for vehicular areas. Base depth is invisible once the job is done, which is exactly why it is where low bids save money.
Drainage and grading
Driveways move a lot of water in a Palm City downpour. The surface has to slope away from the house and toward somewhere that can take the water. If the current driveway ponds or sends water into the garage, drainage correction belongs in the scope. Our yard drainage services are often paired with driveway projects for this reason.
Tear-out, access and the apron
Removing an existing concrete or asphalt driveway adds about $2 to $6 per square foot. Work at the street apron or in the county right-of-way may need a permit; your contractor should confirm this before scheduling. Tight access, existing irrigation lines and tree roots also affect labor.
Project spotlight: two Alpha Zeta driveway and entry installs
Custom driveway paver installation. This Alpha Zeta driveway mixes tan, gray and red pavers in diagonal patterns so the drive reads as a designed surface rather than a single slab color. Palms and shrubs along the edges soften the length of the drive.
Herringbone entry court. Here, gray pavers in a herringbone pattern carry from the gate to the front door. White stacked-stone pillars frame a black metal gate, an armillary sphere on a pedestal anchors the center in a ring of black pebbles, and bromeliads and red-leaf shrubs fill the beds. Carrying one paver color and pattern from the gate to the door, and ideally out to the driveway, is what makes a front elevation feel finished.
Should you choose pavers or concrete for a Florida driveway?
Pavers cost more up front than poured concrete (HomeAdvisor lists concrete driveways at $8 to $18 per sq ft), but they handle Florida conditions well in two ways. Individual pavers can be lifted and reset if a root or utility repair disturbs one area, so there is no visible patch. And the joints let a paver surface flex slightly with minor settlement instead of cracking across the slab. The trade-off is joint maintenance: polymeric sand and periodic cleaning and sealing keep weeds and staining in check.
How do you choose a paver driveway contractor in Martin County?
Get at least two proposals priced against the same scope and ask:
- What base material and compacted depth will you install?
- What paver thickness and product are you using, and is it rated for vehicles?
- What edge restraint holds the perimeter?
- How will water drain off the driveway?
- Is tear-out and haul-off included?
- Who handles any permit for the apron?
- What does the workmanship warranty cover, and for how long?
Our guide on how to find a top hardscape company in Martin County covers licensing and insurance checks in more detail.
Final takeaway
Budget $10 to $30 per square foot installed for a quality paver driveway in Martin County, then adjust for material, pattern, tear-out and drainage. The best way to protect that investment is the work underneath: base, compaction, edge restraint and grading.
Ready to price your driveway? Alpha Zeta designs and installs driveways, entry courts and walkways as part of complete front-yard plans across Palm City, Stuart, Jensen Beach, Hobe Sound, Sewall’s Point and Jupiter Island. Request a proposal or call (772) 283-4123. If the driveway is part of a bigger refresh, our landscape renovation cost guide shows how it fits a full budget.
FAQs
Is a paver driveway more expensive than concrete?
Yes, up front. Pavers typically run $10 to $30 per square foot installed versus about $8 to $18 for a concrete driveway. Pavers make up some of that difference over time through repairability and a longer service life.
How long does a paver driveway last in Florida?
With proper base preparation and occasional maintenance, paver driveways can last 30 to 50 years. Individual damaged pavers can be replaced without replacing the driveway.
Do paver driveways need to be sealed?
Sealing is optional but common. It helps resist oil and rust stains, deepens color and stabilizes joint sand. Most homeowners reseal every few years depending on the product and exposure.
How long does it take to install a paver driveway?
A typical two-car driveway usually takes a few days once any tear-out is complete. Larger estate drives, complex patterns, curing time for polymeric sand and weather can extend that.
What is the best paver pattern for a driveway?
Herringbone, especially at 45 degrees, is a common choice for driveways because the interlock resists shifting under turning tires. Running bond or basket weave patterns can work well in lower-traffic areas like walkways.
Sources
- LawnStarter, How Much Does a Paver Driveway Cost in 2026: https://www.lawnstarter.com/blog/cost/paver-driveway-price/
- Inch Calculator, Cost to Install a Paver Driveway, 2026 Prices (two-car sizing, cobblestone range): https://www.inchcalculator.com/paver-driveway-cost-guide/
- HomeAdvisor, How Much Does It Cost to Pave a Driveway (tear-out cost, paver lifespan, concrete range): https://www.homeadvisor.com/cost/garages/install-a-driveway