Palm City’s Trusted Landscaping Experts – Locally Owned & Operated for Over 40 Years

   +1 772.283.4123  1131 SW 32nd Street Palm City, Florida 34990

HomeBlogLandscaping Tips & TricksMoonlight Landscape Lighting After Hurricane Season: A Palm City Guide

Moonlight Landscape Lighting After Hurricane Season: A Palm City Guide

Moonlight landscape lighting holds up well in Palm City storms when the fixtures hang in wind-firm trees, use brass or copper housings, and have wiring that can flex with the canopy. The best time to add or restore it is after hurricane season ends on November 30, once storm pruning is done and the dry season starts.

Here is how we plan landscape lighting design and installation in Palm City so canopy fixtures last.

Does moonlight landscape lighting survive Florida storms?

Yes, most well-installed moonlight fixtures come through tropical storm winds with nothing worse than a shifted aim. The bigger risk is the branch: if a limb fails, the fixture comes down with it.

In 2004, Hurricanes Frances and Jeanne both came ashore near Hutchinson Island about three weeks apart. University of Florida research on tropical and subtropical tree wind resistance found that sturdy species such as live oak often stay standing in the strongest winds but can still drop large limbs.

Storm damage usually falls into three groups:

  • Fixture knocked out of aim: a quick re-aim during a night visit
  • Wire pulled loose by a broken limb: a climb and a new wire run
  • Cracked or flooded housing: a fixture replacement

Which trees are safe to hang moonlight fixtures in?

Live oak, gumbo limbo and mahogany are the strongest choices here. UF/IFAS ranks all three high for wind resistance, and their open canopies create the soft, dappled moonlight effect.

Laurel oak is common in older Palm City neighborhoods. It can stand through high winds yet shed big limbs, so fixtures belong close to the trunk on main limbs, never out on thin branches.

Palms are different. With no branching canopy to filter the light, a fixture in the crown makes a bright point instead of a soft wash, and pre-storm frond trimming can take wiring with it. 

Uplighting usually suits palms better. If your yard lacks a canopy tree, planting one through landscape design and build planning is a long-term fix, and one more reason native trees make Palm City yards more resilient.

When is the best time to install moonlighting in Palm City?

Late November through early spring is usually the best window. Hurricane season runs June 1 to November 30, and many homeowners across Martin County and the Treasure Coast schedule heavy tree pruning right before or right after it. Mounting fixtures after pruning means they go onto the canopy you will actually have next year.

The dry season also brings fewer afternoon storms, firmer ground for trenching and clear evenings for the nighttime aiming session, when color gets checked too (the warm 2700K to 3000K range in our backyard fence lighting ideas suits most homes). Most residential installs take one to three days; climbing several large trees can add time.

What fixture materials last in Treasure Coast salt air?

Solid brass and copper last longest near the coast because they weather to a patina instead of corroding through. Powder-coated aluminum looks sharp at first but can chip and pit in salt air, especially on properties near the water in Jensen Beach, Sewall’s Point and Hobe Sound.

Fixture materialHow it handles salt airTypical life near the coast
Solid brassDarkens to a patina; housing stays soundOften 20 years or more
CopperTurns brown-green; resists corrosionOften 20 years or more
Powder-coated aluminumCoating chips, then metal pitsOften 5 to 10 years
Plastic or compositeFades and cracks in strong sunOften a few seasons

These are general ranges that vary with salt exposure and upkeep. Stainless steel mounting hardware and sealed wire connectors matter as much as the housing. The same rule applies to outdoor living materials in Palm City’s coastal climate.

How is wiring secured in a tree that grows and sways?

Brass tree light with slack wire

Wire runs straight up the trunk, held by stainless screws or loose straps that leave slack, so the tree can grow and move without the wire cutting into bark. Wire wrapped tightly around a limb can girdle it over time.

Good tree-mount practice includes:

  • Extra wire loops at each fixture so growth and sway don’t pull connections apart
  • Low-voltage cable (usually 12 volts), which is safer to run up a tree than household current
  • Sealed, waterproof connections, since a canopy stays damp for hours after rain
  • A yearly check to loosen fasteners as the trunk widens

What should you check on your tree lighting after a storm?

From the ground, look for lights that won’t turn on, beams now hitting a window, and wire hanging from the canopy. Turn the system off at the transformer first, and stay clear of any cracked or hung-up limb.

Anything above ladder height, or on a damaged limb, is a job for a trained crew and sometimes an arborist. Our maintenance service covers re-aiming, fixture replacement and system upgrades. 

If your moonlighting took a hit this season, or you want it planned around next year’s storms, call Alpha Zeta Landscaping at (772) 283-4123 or reach our team online to set up a consultation.

Final Takeaway

  • Mount moonlight fixtures in wind-firm trees such as live oak, gumbo limbo or mahogany, close to the trunk.
  • Install or restore after storm pruning, between late November and early spring.
  • Choose brass or copper fixtures with stainless hardware and wiring that leaves room to grow.

FAQs

Should moonlight fixtures come down before a hurricane?

Usually not. Fixtures on strong limbs normally stay in place; plan on a re-aim afterward instead.

Does moonlighting work if my yard only has palms?

Not very well. Fixtures under the eaves or on a pergola can give a similar downward glow, or uplighting can feature the palms instead.